Downloads

Firmware

OptiboX_T1000HDCX_VerB.img.zip 2.75 MB
Downloads

Optibox T1000 HDCX

High Definition Digital Terrestrial Receiver - Conax Embedded

MAIN FEATURES

  • High Definition Digital Terrestrial Receiver with Conax Embedded card reader
  • User friendly, multilangual OSD
  • USB2.0 connection support for data transfer
  • 576p, 720p, 1080i support
  • Electronic Program Guide (EPG)
  • Easy and Fast auto programming
  • S/PDIF output for Dolby Digital audio output
  • 4 digit LED display
  • Display for service number and time display
  • Support for JPEG and MP3 files

TECHNICAL SPECIFICATIONS

Tuner & Demodulator

RF Input Range:
VHF High Band III (174MHz ~ 230MHz), BW(7 & 8Mhz)
VHF S Band II(230MHz ~ 300MHz), BW(7 & 8Mhz)
UHF S Band III(300MHz ~ 470MHz), BW(8Mhz)
UHF Band IV(470MHz ~ 606MHz), BW(8Mhz)
UHF Band V (606MHz ~ 862MHz, BW(8Mhz)

Input Connector: IEC-DIN(IEC 169-2) Female
Output Connector: IEC-DIN(IEC 169-2) male (With Loop-Through Output)
Input/Output Impedance: 75[Ohm]
Input Signal Level: -77.5dBm ~ -20dBm
(64QAM, FFT=8K,Code Rate=2/3, Guard Interval=1/8)
Center IF Frequency: 4.571 Mhz
Channel Bandwidth: 7 & 8MHz Switchable
Demodulation Type: QPSK, 16-QAM, 64-QAM
Modulation Mode(FFT Mode): 2K, 8K
Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8
Guard Interval : 1/4, 1/8, 1/16, 1/32
Supporting System: DVB-T(COFDM) Compliant (Frequency Band Modulation)
ETS 300 744 & Nordig Unified 1.0.2.

Loop-Through output(Full band): Compliant with Nordig Specification
External Antenna Power Supply: 5V/50mA Max. (with Short Circuit Protection)

MPEG TS A/V Decoding

Transport Stream Format: MPEG-2/MPEG-4 Part10 AVC/H.264 HD HP@L4.0 1920x1080 @ 50Hz
(MPEG-2 ISO/IEC 13818 Transport stream Specification)
Profile Level: “MPEG-2 MP@HL”, MPEG-4 Part10 AVC/H.264 HD MP@L4.0
Input Rate: Maximum 31.668450Mb/s, 27.709893Mb/s
Video Aspect Ratio: 4:3, Letter Box, 16:9, Pan & Scan
Video Display Resolution: 1920x1080i, 1280x720p, 720x576p, 720x576i @ 50Hz
Audio Decoding Format: MPEG-1 Layer 1,2, Dolby AC-3(Pass-Through)
PCM with Decoded Stereo: AAC Stereo
DTS with Transcoded Multichannel: HE-AAC
Audio Output Mode: Mono, Left, Right, Stereo, Dolby Digital bit-streams
A/V And Data Output

Analog Component YPbPr: 1 Set(3xRCA Vertical Array Type)(* Customer Option)
CVBS(Composite Video): 1 Jack(RCA Type)
S/PDIF Dolby Digital Interface: 1 Optical(Fiber Optic Type)
Stereo Audio: L/R 1 Set(2xRCA Array Type)
HDMI/HDCP: 1 HDMI™ Connector
SCART Interface: TV/VCR(CVBS, RGB)
USB2.0 Host Interface: A-Type Horizontal Connector (Firmware Upgrade Port)

Conditional Access Interface
Smart Card Reader: 1 Slot For Embedded CAS Support(Conax CAS v7)
PCMCIA: N/A

System Resource Information

Main Processor: ST40 32-bit Superscaler RISC CPU_400 Dhrystone 2.1 MIPS@266MHz
Flash ROM: Default 8Mbytes(Secure Flash)
Program & Graphic DDR SDRAM: Default 128Mbytes
(Program 64Mbytes & Graphic 64Mbytes)
Serial EEPROM: Default 128Kbits

Power Supply

Input Voltage: AC 100-240V ~ 50/60Hz
Power Consumption: Maximum 20Watts

Power Consumption in Stand-by Mode:
-Under 2Watts in Passive Stand by Mode

1) Active Stand-by Mode: Press the Stand-by button on RCU/Front Panel shortly to enter this mode.

2) Passive Stand-by Mode: Press the Stand-by button on RCU/Front Panel for 2~3 sec to enter this mode.

Protection: Separate Internal Fuse
Type: SMPS(Switching Mode Power Supply)
Safety And EMI: For Country Regulation

Physical Specification
Dimension(WxDxH): 260x180x55[mm]
Net Weight: About 2.0Kg
Operation Temperature: 5C ~ 50C
Storage Temperature: -40C ~ 65C